WS 35mm Portable Magnetic Drill | Model : WS-3500M - Aikchinhin
WS 35mm Portable Magnetic Drill | Model : WS-3500M - Aikchinhin

WS 35mm Portable Magnetic Drill | Model : WS-3500M

Regular price
$1,182.35
Sale price
$1,182.35
Tax included. Shipping calculated at checkout.

Features : 
  • Serves as two modes of cutter that allows loading in a "One-Touch Shank" or "Weldon Shank" etc
  • Able to switch between two types of drilling by simply changing the drill chuck. Ability to load the following :
    • Annular Cutter
    • Twist Drill
    • Hole Saw
  • Bearing Bracket aligns cutters precisely which increases cutter and motor life. The main shaft's stability is enhanced when utilised with roller bearing and that stops the motor shaft from swaying easily
  • The roller bearing is designed to decrease wear and tear damage so as to reduce the frequency of cutter replacement
  • The magnetic base is made up of double coils thus during start up, the front coil will become magnetic first. 
    • This design is meant to make it easier for the user to make adjustments aligning the magnetic drill. 
    • The 2 coil design is also safer because when 1 coil burns out, the other coil will still be magnetic, holding the drill and preventing it from falling off.
  • The use of an electronic switch rather than a traditional switch is to ensure voltage stability and for the user to adjust the electrical current needed. 

Specifications : 

  • Motor Rated Power Consumption : 1100W 
  • Motor Rated Current : 5A
  • No Load Speed : 780 rpm
  • Tool Adaptor : 19.05mm Weldon / One Touch direct arbor
  • Adjustable in height for max. stroke : 100mm
  • Coolant Supply : via Tool Holder 
  • Magnet Power Consumption : 38W
  • Magnet Adhesion : 7350N / 750kgf
  • Magnet Dimensions : 186 x 80 x 58 mm 
  • Weight : 14 kg
  • Hole Cutting Capacity : 
    • Annular Cutter :
      • Out. Diameter : 
        • 17 - 35 mm (Standard) 
        • 13 - 40 mm (Non-standard) 
      • Plate Thickness 
        • 9 - 35 mm (Standard) 
        • 9 - 50 mm (Non-standard)
    • Twist Drill : 1 - 13 mm

Standard Accessories : 

  • Pilot pin 8.0 x 91mm : 1 pc
  • Double Open End Wrench : 1 pc 
  • Hex. Key Wrench : 
    • 2.5mm : 1pc
    • 6.0mm : 1pc
  • Operating Handle : 3 pcs
  • Lifting Handle : 1 pc
  • Fuse Block : 1 pc
  • Carbon Brush : 1 set 
  • Fixed Screw : 1 pc